2-Piece Hood Hinge Trim Covers | Wrangler JL/JLU 2018–2026 & Gladiator JT

Color-matched hood hinge accents

This two-piece set covers the exposed hood hinges with lightweight ABS decorative shells. Choose a standard color to coordinate with your other exterior trim. Carbon Fiber Look is a patterned ABS finish, not real carbon fiber.

Vehicle compatibility

• Jeep Wrangler JL/JLU 2018–2026, 2-door and 4-door, with matching original hood hinges.
• Jeep Gladiator JT with the matching factory hinge shape. The supplier explicitly lists 2020–2021; confirm the hinge shape before ordering for later model years.
• Not for Wrangler JK/JKU or aftermarket hinges with a different profile.

Package and colors

Includes two hood hinge decorative covers with adhesive backing. These are cosmetic covers, not replacement hinges or hood latches.

Colors: Red, Carbon Fiber Look, White, Black, Blue, Orange, Pink, Purple, Yellow and Green. Actual appearance can vary with lighting and screen settings.

Installation instructions

1. Park safely and let the hood and hinge surfaces cool. Test-fit both covers without removing the adhesive backing; confirm the orientation and full contact around each hinge.
2. Clean the mounting surfaces thoroughly, removing dust, wax, oil and polish. Use a finish-compatible alcohol cleaner on a cloth and allow the surface to dry completely.
3. In cool conditions, gently warm the cover and adhesive with a hair dryer. Keep it moving and avoid overheating the cover or vehicle paint.
4. Peel off the adhesive liner without touching the bonding surface. Align carefully and press the cover evenly into place.
5. Apply firm pressure across every adhesive contact area. Check that no edges lift and that the cover does not interfere with normal hood movement.
6. Allow the adhesive to bond according to the supplied tape instructions before driving, washing or exposing the area to water. Recheck adhesion before use and periodically afterward.

If a cover rocks, lifts or does not fully contact the hinge, correct the fit and adhesive bond before driving. Do not use the covers to lift or secure the hood.