3-Piece Rear Window Hinge & Washer Nozzle Trim Covers | Wrangler JL/JLU Hardtop 2018–2026

A coordinated accent for your hardtop rear window

Refresh the rear-window details with a matching pair of hinge covers and a washer-nozzle cover. The lightweight ABS overlays fit over the original components, adding color and concealing light surface marks.

Vehicle compatibility

• Jeep Wrangler JL/JLU hardtop, 2018–2026, 2-door and 4-door.
• Requires the matching rear glass hinges and washer-nozzle housing shown in the photos.
• Not for Wrangler JK/JKU, Gladiator JT or soft-top rear windows.

Check the shape of both hinge housings and the washer nozzle before ordering, especially if your hardtop or rear-window hardware has been replaced.

Package and colors

• 2 rear-window hinge decorative covers.
• 1 rear-window washer-nozzle decorative cover.
• ABS construction with adhesive backing.

Choose Red, Light Blue, Purple, Black, Blue, Green, Orange, Pink, White or Yellow. These are decorative overlays, not replacement hinges or a replacement washer nozzle. Color appearance varies with lighting and screen settings.

Installation instructions

1. Park safely, switch off the vehicle and ensure the rear-window hardware is cool and dry.
2. Test-fit all three covers without removing the adhesive liners. Confirm the left and right hinge positions and keep the washer spray opening clear.
3. Clean the contact surfaces thoroughly with a finish-compatible cleaner to remove dirt, wax and grease. Let them dry completely.
4. In cool conditions, gently warm the adhesive with a hair dryer. Keep it moving and avoid overheating the covers, glass or seals.
5. Peel the liners, align each cover carefully and press firmly over the adhesive contact areas. Do not cover the nozzle outlet or interfere with moving hinge parts.
6. Allow the adhesive to bond according to the supplied tape instructions before washing, rain exposure or driving.
7. Carefully check rear-glass opening and closing, then test the rear washer and wiper. Correct any obstruction, lifting edge or loose cover before use.

No drilling or removal of the original hinges is required. Do not loosen hinge fasteners or use the covers to lift the rear glass. Recheck attachment periodically.